Adam Equinox Precision Balance, 6200g x 0.01g, Internal Calibration – 120/220V 50/60Hz – Pan Size: 7.5" x 7.5" (190 x 190mm)
Sieve, 12'' Dia, (2.36mm),Half height, Brass Frame, Mesh
Ohaus Defender 5000 Standard Bench Scale, Low-Profile, 125kg / 250lb x 5g / 0.01lb – 220V 50/60Hz – Platform: 18" x 24" 457mm x 610mm
Rhoma-Sol™ Specialty Emulsifier
Spray-on solution used in the removal of asphalt and tack oil from testing, paving, oiling, patching, reclaiming and other work zone equipment. Contains no haza
Cylinder - Double Acting Hydraulic Return
Cylinder - Double Acting Hydraulic Return, 500 ton, 700 bar, double acting
Plated Steel Wire Support Ring. 3", 2-15/16"(75mm) ID, 3-1/2"(89mm) OD.
With lug Approx. 20,000
> ABSOLUTE Digimatic Indicator ID-S The Mitutoyo ABSOLUTE Digimatic ID-S indicators are highly accurate and easy to use for measuring short linear distances in
Compaction Mold, Three Part with Hammer– 1.875"
Scoop, Flat Nose, Aluminum
Aluminum, Flat Nose Scoop— Bowl Vol./Water (oz/cu. in.): 6.7 (12.2), Length: 6" (152mm), Width: 3-3/4" (95mm), Depth: 2" (51mm), Overall Length: 9-1/4" (235mm)
Caliper / Height Gage
Dust/Water protection level: IP67*2 Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) Position detection method: ABSOLUTE
Vernier De Profundidad (Tipo Standard) Base De Extensión
Made of stainless steel Satin chrome plated reading surface
High Capacity Cylinder - Single Acting Gravity Return
High Capacity Cylinder - Single Acting Gravity Return, 25 ton, double acting
Stand Assembly
> Individual Inch Rectangular Gage Block The Mitutoyo individual inch rectangular gage blocks are ideal when one length of gage block is being used repeatedly.
Hydraulic Cylinder - Single Acting Spring Return
Hydraulic Cylinder - Single Acting Spring Return, 700 bar, double acting
Stud Setting Tool
This device is designed to verify the proper spacing between gauge studs in molds used for measuring length change in cement pastes and mortars.
Bore Gages — for Small Holes
> Series 148 Micrometer Heads-Common Type-Small-Zero-Adjust The Mitutoyo smaller-sized standard micrometer head with zero-adjustable thimble is shorter in lengt
Scale Unit
> Individual Metric Rectangular Gage Block The Mitutoyo individual metric rectangular gage blocks are ideal when one length of gage block is being used repeated
Inside Measuring Instrument
> Series 368 Mechanical Holtest Three-Point/Two-Point Internal Micrometers The Mitutoyo Holtest mechanical three-point internal micrometer utilizes three self-c
Fill Oil for Blaine Apparatus
Fill Oil for H-3056, H-3058 and H-3059 Blaine Apparatus.
Concrete Crack Gauge for Corners
The corner crack gauge uses a hinged mounting bracket to allow monitoring of cracks in corners with angles between 70° and 180°. Monitors both internal and exte
Hammer Assemblies, Hammer Slide Shaft
Hammer slide shaft for use with H-1364, H-1366 Series Heavy-Duty, Automatic Single Compactors.
With ratchet st
> Individual Inch Rectangular Gage Block The Mitutoyo individual inch rectangular gage blocks are ideal when one length of gage block is being used repeatedly.
