Diamond Drill Bits, High-Performance, 1/2 inch, (13mm)
Diamond Drill Bits, High-Performance, 5/8 inch (17mm)
Diamond Drill Bits, High-Performance, 3/4 inch (19mm)
Diamond Drill Bits, High-Performance, 7/8 inch (22mm)
Diamond Drill Bits, High-Performance, 1 inch (28mm)
NCAT Field Permeameter (Permeameter only)
The NCAT field permeameter is for those who don't wish to buy the complete kit or who need to replace an existing one. This field permeameter is the same permea
AutoRice USB Shaker Sensor
AutoRice USB Shaker Sensor measures shaking frequency and acceleration to prevent stripping damage to the sample. For use with the AutoRice controller. Operatin
Vacuum Pump Oil, 1 Quart
High purity oil with low vapor pressure that does not materially increase at temperatures up to 50°C (122°F) and viscosity sufficiently low for use at 125°C (25
Vacuum Pump Oil, 1 Gallon
Vacuum Pump Oil, 1 Gallon
Vacuum Pump Oil, 1-Qt. (Case of 12)
Vacuum Pump Oil, 1 Gallon (Case of 6)
Hardened stainless steel wax penetration needles with tapered point, blunt tip of truncated cone. Ferrule is approx. 3.2mm dia. Wt. 2.5g.
Penetration Needle, ASTM D1321, Certified to ASTM accuracy
Penetration Needle, Measuring firmness of solid and plasticized fats
Measuring firmness of solid and plasticized fats: shortenings, butter, margarine. AOCS Cc 16-60, 20° aluminum cone, 3.2mm ferrule, 0.8mm stainless steel blunt t
Penetration Needle, Recovery of Used Grease, Small Samples, ASTM D1403
Recovery of used grease) Small obtainable samples; ASTM D1403, 1/4 scale. (Not considered a substitute for full-size cone specified in ASTM D217.) Wt. 9.38g.
Penetration Needle and Cone, Grease Testing, Hollow 90° Brass Cone, Highly Polished Stainless Steel Tip
Penetration Needle and Cone, Grease Testing, Hollow 90° stainless steel cone, highly polished stainless tip. Removable nut and stem. Wt. 102.5g.
Penetration Needle and Cone, ASTM D2884
ASTM D2884; Hollow 90° Magnesium cone and plunger, Total Cone wt. 30.0g
Transfer Dish
Plastic transfer dish has flat bottom, straight sides and metal centering lugs with magnet in the bottom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm).
Marshall Mold Extractors, 6"
Used with compression tester for removing 6" compaction mold specimens. Shipping wt. 3 lbs. (2kg).
Asphalt Permeameter, 4" Membranes (pkg. of 6)
Package of 6, 4" membrane replacements for the 4" Asphalt Permeameter.
Asphalt Permeameter, 4" O-rings (pkg. 3)
Package of 3, 4" o-ring replacements for the 4" Asphalt Permeameter.
Mold Extractor, 4"
Used with compression tester for removing 4" compaction mold specimens. Shipping wt. 2 lbs. (1kg).
