Rupture Disk Holder
Rupture disk holder, complete with piping to attach to the H-3240 cement autoclave. Order rupture disks separately.
Air vent valve for Autoclave
Air vent valve for Autoclave
Safety Pop-off Valve for Autoclave
This pop-off valve provides additional safety for the Autoclave.
Pressure gauge for Autoclave
Pressure gauge for Autoclave
Pressure-control switch for Autoclave
Pressure-control switch for Autoclave
Set of cap screws, 16 per set for Autoclave
Set of cap screws, 16 per set for Autoclave
Relay 60Hz for Autoclave
Relay 60Hz for Autoclave
Optional Stand for Compression Machine
Can be used with models HCM-0030 Series, HCM-1000 Series and HCM-2500 Series machines
Limit Switch, HCM-2500 Series
A Compression Machine, HCM-2500 Series, electrical switch that prevents the hydraulic piston from going beyond its maximum travel point.
Mounting stand for Compression Machine, Optional
Optional mounting stand for HCM-0030 Compression Machine.
Flow Mold, 70mm/100mm x 50mm high
Air Content Measure, 400ml
Calibrated to 400ml, this measure is used to determine air content of hydraulic cement mortar. Cylindrical with 3" (76mm) ID, approximately 3-15/32" (88mm) dept
Switch and Cable
A Switch and Cable without a bracket.
Bracket for Switch
A Bracket for use with a Switch
Adjustable Point Gauge Assembly
Flow Cone Point Gauge Level Indicator.
2" Cube, 3-gang Mold
Required for compaction of 2" (50mm) cubes samples for ASTM C109 standard. It can be ordered with a fast-action clamp fitting, enquire.
Needle Cleaning Device
Needle cleaning device for vicat needles, cleans needles between tests to ensure accurate results.
Printer paper (10 rolls)
Box of 10 rolls of printer paper for use with H-3052 Vicat Machine.
Still Cleaner
Use with H-1871 and H-2345. Tool to remove residue from interior of still, 13" x 4" (328 x 101mm) diameter.
PAV Verification Kit
Provides NIST-traceable temperature and pressure verification and includes a calibration block. Temperature range is -201 to 1210?C with a ? 0.03?C accuracy. Pr
PAV O-Ring
Single-stage air pressure regulator (for external use on air tank) • 0-4,000 psi high pressure gauge. • 0-600 psi low pressure gauge includes relief valve.
CGA Adapter
For use with bottles using 346 CGA connection.
High Pressure Hose
6 ft. stainless steel braided sheath pressure hose. Includes fittings and quick connect coupling.
