Heat Intensified Top, Distributes heat evenly across the top of high-temperature burners
Designed to distribute the heat evenly across the top of high temperature burners through a perforated Monel plate. Same top as used on H-5500, H-5550 and H-560
Flame Stabilizer, Recommended for gases of 800 BTU/cu.ft. or more
This patented Humboldt unit fits 1/2" (13mm) diameter mixing tubes without modifications. It is recommended for use with gases of 800 BTU/cu.ft. or more and can
Burner Gas Connector
Gas Connector. Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3
Standard Burner Wing Top, 7/16" (11mm) Mixing Tube OD
Specifications: -7/16" (11mm) Mixing Tube OD Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other simil
Large Burner Wing Top, 1/2" (13mm) Mixing Tube OD
Specifications: -1/2" (13mm) Mixing Tube OD Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other simila
Burner Wing Top for use over Humboldt burners equipped with flame stabilizer H-6860, 11/16" (18mm) Mixing Tube OD
Specifications: -11/16" (18mm) Mixing Tube OD -For use over Humboldt burners equipped with flame stabilizer H-6860. Designed to produce a broad, flat, fan-shape
Regulator End Hose Kit for Cylinder Gas
Gas hose for burners with regulator end for use with bottled gas.
Cylinder Platen for HCM-2500, 4000 and 5000 machines
Cylinder Platen for HCM-3000 Machine
Platen for 3" x 6" and 2" x 4" Cylinders on HCM-2500 Machine
Platen for 3" x 6" and 2" x 4" Cylinders on HCM-3000 Machine
Platen for 3" x 6" Cylinders on HCM-4000 & 5000 Machines
Cube Test Set, 6", for HMC-2500 series machines
Cube Test Set, 6", for HMC-3000 series machines
Cube Test Set, 6", for HMC-4000 and HMC-5000 series machines
2" Cube Test Set, HCM-0030 Series Machines
2 in. Cube Platen Set for HCM-2500 and HCM-0030 Machines
2 in. Cube Set for HCM-3000 Machines
2 in. Cube Platen Set for HCM-4000 and 5000
Compressometer with Dial Gauge, 6" x 12" (152 x 305mm)
Compressometer with Dial Gauge, 4" x 8" (101 x 203mm)
Compressometer with Dial Gauge, 3" x 6" (76 x 152mm)
Compressometer with LSCT, 6" x 12" (152 x 305mm)
