Triaxial Cell, 4.0" Top Cap Only, Stainless Steel
Splitter Spacer Assembly
An optional splitter spacer assembly bolts to the top of the fixture, to allow testing of 4" x 8" cylinders.
Draw Rod Assembly
Draw rods are included with all masonry model machines with manual controllers. For machines with HCM-5080 and HCM-5070 the Draw Rod Assembly must be ordered se
Cylinder Loading Shelf
Auxiliary Cylinder Loading Shelf is available for use with HCM-2500 Series machines.
Vicat Conical Mold, Brass
Brass mold, 76mm dia. x 40mm high. For use with H-3085 vicat apparatus.
Vicat Conical Mold, Plastic
Plastic mold, 70mm bottom dia. x 60mm top dia. x 40mm high. For use with all Vicat apparatuses.
Marshall Breaking Head, 4"
Marshall Breaking Heads consist of an upper and lower cylindrical segment having an inside radius of curvature of 2" for a 4" sample. The lower segment is mount
Marshall Breaking Head, 6"
Marshall Breaking Heads consist of an upper and lower cylindrical segment having an inside radius of curvature of 3" for a 6" sample. The lower segment is mount
Marshall Breaking Head, Metric
Marshall breaking heads consist of an upper and lower cylindrical segment. The lower segment is mounted on a base with two perpendicular guide rods extending ve
IDEAL-RT Test Head
Test head used in IDEAL-RT determinations of asphalt mixes.
Semi-Circular Bending (SCB) Head
The H-1351 Semi-Circular Bend (SCB) fixture has been designed for use with the AASHTO TP124 and ASTM D8044 test methods. The H-1351 SCB head can be configured i
Burner Grid Top, Perforated monel grid, 1-1/4" diameter
Designed to diffuse the flame. Perforated monel grid, 1-1/4" diameter.
Burner Grid Top. Perforated monel grid, 1-1/4" diameter
Designed to diffuse the flame. Perforated monel grid, 1-1/4" diameter.
Burner Grid Top
Designed to diffuse the flame. Perforated monel grid, 1-1/4" diameter.
Heat Intensified Top, Distributes heat evenly across the top of high-temperature burners
Designed to distribute the heat evenly across the top of high temperature burners through a perforated Monel plate. Same top as used on H-5500, H-5550 and H-560
Flame Stabilizer, Recommended for gases of 800 BTU/cu.ft. or more
This patented Humboldt unit fits 1/2" (13mm) diameter mixing tubes without modifications. It is recommended for use with gases of 800 BTU/cu.ft. or more and can
Burner Gas Connector
Gas Connector. Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3
Standard Burner Wing Top, 7/16" (11mm) Mixing Tube OD
Specifications: -7/16" (11mm) Mixing Tube OD Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other simil
Large Burner Wing Top, 1/2" (13mm) Mixing Tube OD
Specifications: -1/2" (13mm) Mixing Tube OD Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other simila
Burner Wing Top for use over Humboldt burners equipped with flame stabilizer H-6860, 11/16" (18mm) Mixing Tube OD
Specifications: -11/16" (18mm) Mixing Tube OD -For use over Humboldt burners equipped with flame stabilizer H-6860. Designed to produce a broad, flat, fan-shape
Regulator End Hose Kit for Cylinder Gas
Gas hose for burners with regulator end for use with bottled gas.
Cylinder Platen for HCM-2500, 4000 and 5000 machines
Cylinder Platen for HCM-3000 Machine
